Head cleaning does not help.

a) check for leaks between head and captopem, the head must tightly adhere to captopa.
b) if captop is attached tightly to clean the print head does not help, replace the captop or follow the steps indicated below.
a) follow the procedure cap clean video.
b) make sure that the drainage tubes are way-fluid and ink should flow down to the tank debris.
c) if the liquid does not passes through, replace or przetkaj tubes.
d) also check that the hoses are not loose or leaking.
e) hoses are unobstructed, and the fluid does not flow-replace the pump.
f) if the pump runs, the hoses are unobstructed and fluid flows freely into the tank and head still do not want to clear the execute procedure soaking-in the MEDIA menu, take the ambulance left, pour cleaning liquid to cap-top, press the BACK button. The ambulance will come back to the place-make sure that the cleaning station is properly parked and correctly attached to the head. Turn off the plotter and leave for 1-12 hours.